ADC Kentrox ISDN NT1 1010 Especificaciones descargar pdf (Pagina 111)

100

101

Reference Guide

3-5

System Installation Chassis Installation

The brackets are also reversible for mounting in 19-inch or 23-inch racks (48.2 or 58.4 cm).

For a 19-inch rack, attach the long sides of the brackets to the chassis. For a 23-inch rack,

attach the short sides of the brackets to the chassis.

Figure 3-2. Mounting Bracket Holes

If you are placing the chassis on a tabletop or other flat surface, be sure to leave enough

clearance for air circulation through the system. Make sure the chassis is accessible from the

front, and that it has at least 3/4 inches (2 cm) of room above it. Attach the metal brackets to

the chassis sides. Then, insert the plastic abrasion-protective "feet" in the holes near the ends

of the bracket.

3.3.4.2 Front-Loading Chassis with Power Supplies on Top

The front-loading chassis with power supplies on top also has eight holes on the bottom of

each side, as shown in Figure 3-3. Attach the mounting brackets of Figure 3-3 to these holes

on each side of the chassis, in order to mount the chassis in a 19- or 23-inch rack. Or, attach

the brackets to the two holes on the bottom of the chassis for mounting on a tabletop or other

flat surface.

Key: Oval Holes for Rack Attachment

Round Holes for Rack Attachment

Holes for Tabletop Attachment

Holes for Plastic Inserts ("Feet")

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 551 552

Comentarios a estos manuales

Sin comentarios

ADC Kentrox ISDN NT1 1010 Especificaciones Pagina 111

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ADC Kentrox ISDN NT1 1010